click here for overall site plan with project locations below using (C1,C2...) to indicate matching below references
left side view
right side view
labor: 1 general volunteer to lead + 2-4 general volunteer carpenters to cut&install 2x12
matls: 18 2"x12"x12' Redwood common
24 4x4 x 2' Redwood (secure inside corners)
large box 3.5" galvanized deck screws (for corners)
5 2x4 x 10' Redwood common (midspan anti-spreading supports @ 6' oc)
Lyngso "Diestel structured compost": 15 cubic yards @ $76/ (2.6 CY/box * 6)
tools: 16d hot dip galv nails, cordless screwdrivers,
labor: 1 volunteer, 2 hours on prep day person to grind stump into ground (visible from path on left)
1-2 volunteers, 3 hours on prep day to run trencher and install PVC rough-in irrigation plumbing
2-3 to place pavers according to path noted as - - - - - on pdf plan (after trenching, irr pipe install, covered trenches)
Equipment:
stump grinder rental
trencher rental
est 200 ft 3/4 pvc sch 40
labor: 2 PhD wielding artists to dig 2' deep holes using Post hole Digger
matls:
2 4x6 x 10' redwood posts (place 3.5' apart inside edge to inside edge, 6" dim parallel to sidewalk)
2 sacks fence post concrete
4 2x6 x 4' redwood decoratively cut, 2 per post parallel to small sidewalk
12 1x1 x 4'4" redwood (decoratively cut at ends, if desired)
4 6' tree posts + ties
tools:
2 shovels
1 wheelbarrow
long garden hoses (nearest spigot?)
grab 8-10 deck screws from planterbox project C1) or C4)
box 10d HDG box nails
hammers & cordless screwdriver (briefly)